ATOMm-4000 SLA Anlage
3D Drucker SLA/Stereolithografie, Kunststoff
Technische Daten anzeigen
| Lasertyp: | Solid State Laser 1.2W 80KHz |
| Scanning System: | Digital Scanner Mirror (TSS4) |
| Maximale Scangeschwindigkeit: | 30m/sec |
| Laser-Durchmesser: | variabel 0.1mm - 0.6mm |
| Netto-Bauraum: | 400mm x 400mm x 300mm |
| Minimale Schichtstärke: | 0.05mm |
| Recoating System: | Blade Recoater |
| Abmessungen: | 1565mm x 1050mm x 1860mm (BxTxH) |
| Gewicht: | ca. 550 KG |
| Netzspannung: | 230V, 60Hz, 15A |
| Gesetzliche Bestimmungen: | CE |
| Datenblatt herunterladen | |
Materialien anzeigen
| Bezeichnung | TSR-829 | TSR-831 | TSR-832 | TSR-880 | TSR-883 | TSR-890 |
| Viscosity(mPa・s)/25℃ | 210 | 420 | 340 | 372 | 520 | 230 |
| Liquid specific gravity / 25 ℃ | 1.07 | 1.1 | 1.106 | 1.13 | 1.12 | 1.07 |
| Ec (mJ/cm^2) | 19 | 18 | 17 | 22 | 18 | 24 |
| Dp (mm) | 0.19 | 0.17 | 0.16 | 0.22 | 0.18 | 0.18 |
| Tensile strength (MPa) | 44 | 39 | 51 | 53 | 60 | 40 |
| Elongation at break (%) | 8 | 14 | 8 | 8.5 | 5-8 | 9.4 |
| Tensile modulus (MPa) | 1.670 | 1.600 | 2.000 | 1.850 | 2.730 | 1.910 |
| Flexural strength (MPa) | 68 | 62 | 80 | 78 | 98 | 65 |
| Flexural modulus (MPa) | 1.840 | 1.650 | 2.300 | 2.350 | 2.710 | 1.810 |
| Izod impact-notched(J/m) | 34 | 49 | 31 | 45-50 | 37 | 41 |
| HDT@1.81MPa (℃) | 49 | 45 | 52 | 48 | 54 | 46 |
| HDT@0.46MPa(℃) | 53 | 48 | 59 | 52 | 59 | 49 |
| Tg(℃) /DMA, E”/1Hz | 55 | 41 | 57 | 48 | 52 | - |
| Surface hardness(ShoreD) | 83 | 80 | 84 | 80-82 | 84 | 81 |
| Volume shrinkage(%) | 5.5 | 5.2 | 5.3 | 5.4 | - | - |
| Antimon-Frei | Ja | Ja | Ja | Nein | Nein | Nein |
| Eigenschaften | Transparent,Feuchtigkeitsresistent | Belastbar | Urmodelle für Vakuum-Guß | Belastbar | Urmodelle für Metallguß | Transparent/Bealstbar |